Patch Panel & Modules
Introduction
Preterminal wiring box product, 12 and 24 cores are converted to LC&SC duplex connectors through MPO connector branches to improve the flexibility of link system design. At the same time, convenient and fast installation, port easy to identify, flexible wiring, easy to manage.
Features
· Conform to theTelcordia GR-326&GR-1435,IEC,TIA/EIA standard
· 100% optical performance test and control of geometrical parameters of end face
· High Performance in IL
· High repeatability and interchangeability
· Customized configurations
· Obtained certifications of ROHS and REACH
Application
· Data center
Technical specifications
1)Optical properties – Common connectors
Type of connector | LC, MU,FC, ST, SC | ||
---|---|---|---|
Optical fiber mode | SM | MM | |
End face type | UPC | APC | UPC |
IL (dB) | ≤0.3 | ≤0.3 | ≤0.3 |
RL (dB) | ≥50 | ≥60 | ≥20 |
Durability (dB) | ≤0.2 1000times | ||
Operating temperature(℃) | -20 ~+70 |
2)End face geometry - General connector
End face type | UPC | APC |
---|---|---|
Radius of curvature(mm) | 7-25 | 5-12 |
Vertex offset(μm) | ≤50 | |
Fiber optic height(nm) | +50 (raised)/-100 (concave) | ±100 |
Angular deviation (o) | / | 8土0.5 |
3)Optical properties --MPO connectors
Type of connector | MPO | |||
---|---|---|---|---|
Optical fiber mode | SM | MM | ||
IL(dB) | standard | Low loss | standard | Low loss |
≤0.75 | ≤0.35 | ≤0.75 | ≤0.35 | |
RL (dB) | ≥60 | ≥60 | ≥20 | |
Durability (dB) | ≤0.2 500times | |||
Operating temperature(℃) | -20 ~+70 |
4)End face geometry - MPO connector
End face type | PC | APC |
---|---|---|
Radius of curvature(mm | X- axial:2000 Min.,Y- axial:5 Min. | |
Optical fiber height (nm) | 1000-3500 | |
Optical fiber height difference (nm) | 500 Max. ,300 Adj. | |
Plane deviation (o) | X- axial:土0.15,Y- axial:土0.20 | |
Polishing Angle (o) | / | 8土0.5 |